Range
Function
This API is used to get Alarm > Pedestrian Detection configuration parameters range.
Request Message
Table 1
| Parameter | Range | Type | Description |
|---|---|---|---|
| channel | "CH1"…"CHx", "IP_CH1"…"IP_CHx", "WIFI_CH1"…"WIFI_CHx" The channels supported by the device. | string array | IPC can only Use "CH1". |
| page_type | "ChannelConfig", "AlarmConfig" | string | It is used to distinguish the data of channel configuration page or alarm configuration page |
Sample:
POST /API/AlarmConfig/Intelligent/PD/Range HTTP/1.1
{
"version": "1.0",
"data": {"page_type": "AlarmConfig"}
}
Response Message
Parameter Description
Table 2
| Parameter | Range | Type | Description |
|---|---|---|---|
| channel_info | object | Total channel information see Table 3. | |
| page_type | "ChannelConfig", "AlarmConfig" | string | It is used to distinguish the data of channel configuration page or alarm configuration page. |
| channel_max | int | The maximum number of channels. |
Table 3
| Parameter | Range | Type | Description |
|---|---|---|---|
| CH1 | object | See Table 4 | |
| … | object | ||
| IP_CH1 | object | ||
| … | object | ||
| WIFI_CH1 | object | ||
| … | object |
Table 4
| Parameter | Range | Type | Description |
|---|---|---|---|
| status | "Offline","Online","Nonsupport" | string | Online status of the channel, only for digital channels. Note: When the channel is online, there is no such field. |
| alarm_out | "Local->1"…"Local->x" "IP_CH1->1"…"IP_CHx->x" The number of channels depends on the function of the device. | string array | alarm Output channel. Array members use a string to represent an alarm output channel. Local->1: open, empty value: close. |
| latch_time | "10","20","40","60" | string | Alarm output time, IPC: 5 10 20 30 |
| record_enable | true, false | bool | Channel recording switch. |
| record_channel | "CH1"…"CHx" "IP_CH1"…"IP_CHx" "WIFI_CH1"…"WIFI_CHx" | string array | Channel of linkage recording. |
| post_recording | "30","60","120","300" | string | Recording delay time, IPC: 0 5 10 20 30. |
| send_email | true, false | bool | Send Email switch. |
| ftp_picture_upload | true, false | bool | Channel snapshot FTP upload switch (for NVR only). |
| ftp_video_upload | true, false | bool | Channel video FTP upload switch (for NVR only). |
| picture_to_cloud | true, false | bool | Picture upload switch (for NVR only). |
| video_to_cloud | true, false | bool | Video cloud upload switch (for NVR only). |
| full_screen | bool | FullScreen switch (for NVR only). | |
| buzzer | "0","10","20","40","60" | string | Buzzer buzzing time (for NVR only). |
| show_message | bool | Show Message switch (for NVR only). | |
| switch | true, false | bool | switch, false: close;true: open. |
| is_ai_param | true, false | bool | Distinguish between ordinary humanoid and intelligent humanoid models (only for NVR). |
| level | "Low", "Middle", "High" | string | Detection sensitivity. |
| sensitivity | 0-100 | int | Detection sensitivity. |
| snap_mode | "Default","RealTimeMode","IntervalMode" | string | "IntervalMode". |
| min_pixel | 64-1080 | int | minimum pixel value. |
| max_pixel | 320-1080 | int | maximum pixel value. |
| detection_type | "Pedestrian", "Vehicle", "Pedestrian & Vehicle" | string | Detection type, human and vehicle. |
| detection_mode | "StaticMode","MotionMode" | string | detection mode. |
| detection_range | "FullScreen","Customize" | string | detection range. |
| iva_lines | 0,1 | int | Whether there will be lines in preview and playback, 0 does not draw lines, 1 draws lines. |
| rule_info | object | See Table 5 for details. | |
| voice_prompts_index | 0~4294967295 | int | File index (0~4294967295, 0 means None, that is, no audio file is selected). Each file is named as "index_filename" (1_i will try), on the page When displaying, "index_" should be hidden, such as "1_i will try", and only "i will try" will be displayed. |
| voice_prompts_select | int array | Play channel, counted by bit (bit0 is local, bit1 corresponds to front-end channel 1, bit2 corresponds to channel 2...). | |
| voice_prompts_time | object array | Time period, there can be no time conflict among the 12 time periods, see Table 8. | |
| copy_ch | "digit", "analog", "wifi" | string | Support channel copy flag (for NVR and DVR only). |
Table 5
| Parameter | Range | Type | Description |
|---|---|---|---|
| rule_number1 | object | rule number 1, see Table 6. |
Table 6
| Parameter | Range | Type | Description |
|---|---|---|---|
| rule_switch | bool | rule switch. | |
| rule_type | "Normal" | string | rule type. |
| rule_rect | object | Rectangle, see Table 7 for details. |
Table 7
| Parameter | Range | Type | Description |
|---|---|---|---|
| x1 | 0-704 | short | x1 coordinate point. |
| y1 | 0-576 | short | y1 coordinate point. |
| x2 | 0-704 | short | x2 coordinate point. |
| y2 | 0-576 | short | y2 coordinate point. |
| x3 | 0-704 | short | x3 coordinate point. |
| y3 | 0-576 | short | y3 coordinate point. |
| x4 | 0-704 | short | x4 coordinate point. |
| y4 | 0-576 | short | y4 coordinate point. |
Table 8
| Parameter | Range | Type | Description |
|---|---|---|---|
| start_hour | 0-23 | int | |
| start_minute | 0-59 | int | |
| start_second | 0-59 | int | |
| end_hour | 0-23 | int | |
| end_minute | 0-59 | int | |
| end_second | 0-59 | int |
Sample:
HTTP/1.1 200 OK
Content-Type: application/json
{
"result": "success",
"data": {
"channel_max": 16,
"support_copy": true,
"channel_info": {
"type": "object",
"items": {"CH2": {
"type": "object",
"items": {
"status": {
"description": "Only offline channel has this variable.",
"type": "string",
"mode": "r",
"items": [
"Offline",
"Online",
"Nonsupport"
]
},
"buzzer": {
"type": "string",
"items": [
"0",
"10",
"20",
"40",
"60"
]
},
"alarm_out": {
"type": "array",
"min_size": 0,
"max_size": 33,
"items": {
"type": "string",
"items": [
"Local->1",
"IP_CH1->1"
]
}
},
"latch_time": {
"type": "string",
"items": [
"10",
"20",
"40",
"60"
]
},
"record_enable": {"type": "bool"},
"record_channel": {
"type": "array",
"min_size": 0,
"max_size": 16,
"items": {
"type": "string",
"items": [
"CH1",
"CH2",
"CH3",
"CH4",
"CH5",
"CH6",
"CH7",
"CH8",
"CH9",
"CH10",
"CH11",
"CH12",
"CH13",
"CH14",
"CH15",
"CH16"
]
}
},
"post_recording": {
"type": "string",
"items": [
"30",
"60",
"120",
"300"
]
},
"show_message": {"type": "bool"},
"send_email": {"type": "bool"},
"full_screen": {"type": "bool"},
"ftp_picture_upload": {"type": "bool"},
"ftp_video_upload": {"type": "bool"},
"picture_to_cloud": {"type": "bool"},
"video_to_cloud": {"type": "bool"},
"copy_ch": {
"type": "string",
"items": [
"digit",
"analog",
"wifi",
"local",
"all"
]
},
"voice_prompts_index": {
"type": "array",
"min_size": 0,
"max_size": 12,
"items": []
},
"voice_prompts_select": {
"type": "array",
"min_size": 0,
"max_size": 12,
"items": []
},
"voice_prompts_time": {
"type": "array",
"min_size": 0,
"max_size": 12,
"items": []
},
"http_listening": {"type": "bool"}
}
}}
}
}
}
Error Code
See Response Messages Body and Common error_code for more information.