Range
Function
This API is used to get AI > Setup > Region Exiting configuration parameter scope.
Note:
The Range provides reference information for client UI input limits and API request limits. When sending Get and Set requests, the parameters must be strictly limited according to the Range, otherwise the request may be rejected by the device.
Request Message
Table 1
| Parameter | Range | Type | Description |
|---|---|---|---|
| channel | “CH1”…”CH1x” “IP_CH1”…” IP_CH1x” “WIFI_CH1”…” WIFI_CH1x” The number of channels depends on the capabilities of the device. | String array | Each array bit represents a channel with a string. DVR/NVR need; IPC only use CH1 |
| page_type | “ChannelConfig”, “AlarmConfig” | string | The data used to distinguish whether it is a channel configuration page or an alarm configuration page |
Sample:
POST /API/AI/Setup/RegionExiting/Range HTTP/1.1
{
"version": "1.0",
"data": {
"channel": [
"CH1"
],
"page_type": "ChannelConfig"
}
}
Response Message
Parameter Description
Table 2
| Parameter | Range | Type | Description |
|---|---|---|---|
| channel_info | JSON object | Channel Information JSON show as follow Table 3 | |
| page_type | “ChannelConfig”, “AarmConfig” | string | It is used to distinguish whether it is the data of the channel configuration page or the alarm configuration page, it is only required when Set |
| channel_max | int | Maximum number of channels |
Table 3
| Parameter | Range | Type | Description |
|---|---|---|---|
| CH1 | Json Object | JSON show as follow Table 4 | |
| … | Json Object | ||
| IP_CH1 | Json Object | ||
| … | Json Object | ||
| WIFI_CH1 | Json Object | ||
| … | Json Object |
Table 4
| Parameter | Range | Type | Description |
|---|---|---|---|
| status | "Offline","Online"， “Nonsupport” | string | Channel online status, only for digital channels. Note: When the channel is online, there is no such field |
| alarm_out | “Local->1”… ”Local->x” “IP_CH1->1”… “IP_CH1->2”… ” IP_CHx->1” ” IP_CHx->2” The number of channels depends on the capabilities of the device. | array | Alarm output channel Each array bit represents aalarm output channel with a string. Camera: Local->1: open, null value: close |
| latch_time | "10","20","40","60" | string | Alarm output time |
| record_enable | true, false | bool | Recording channel switching |
| record_channel | “CH1”…”CH1x” “IP_CH1”…” IP_CH1x” “WIFI_CH1”…” | array | Alarm output channel Channel alarm linkage switch. |
| post_recording | "30","60","120","300" | string | Video delay time |
| send_email | true, false | bool | Send Email switch |
| ftp_picture_upload | true, false | bool | Channel capture FTP upload switch (for NVR only) |
| ftp_video_upload | true, false | bool | Channel recording FTP upload switch (for NVR only) |
| picture_to_cloud | true, false | bool | Picture upload switch (for NVR only) |
| video_to_cloud | true, false | bool | Video cloud upload switch (for NVR only) |
| full_screen | bool | FullScreen switch (for NVR only) | |
| buzzer | "0","10","20","40","60" | string | Buzzer sounding time (for NVR only) |
| show_message | bool | Show Message switch (for NVR only) | |
| switch | true, false | bool | PID enable switch, false: close true: open |
| detection_type | "Motion" "Pedestrian" "Vehicle" "Pedestrian &Vehicle" | string | Detection type, human shape and vehicle shape (normal detection type) |
| detection_type | “Pedestrian” "Motor Vehicle" "Non-motorized Vehicle" | array | Detection type, human figure, motor vehicle, non-motor vehicle (machine is not human type) |
| sensitivity | 1-100 | int | Detection sensitivity |
| target_validity | 1-4 | int | Target validity |
| min_pixel | 64-1080 | int | Minimum pixel value |
| max_pixel | 320-1080 | int | Maximum pixel value |
| rule_info | JSON object | Single-channel information JSON is as follows Table 5 | |
| point_num | [min:max] | array | The number of points drawn in the area, minimum 3 points (min), maximum 8 points (max) |
| schedule_enable | bool | Schedule mode | |
| ptz_operation_support | bool | (Ball machine use)Supports the ptz operation | |
| iva_lines | 0 Do not draw a line 1 Draw a line | int | Preview and play back whether lines will appear |
| light_linkage | bool | White light linkage alarm | |
| tracking_link | bool | Tracking linkage switch(Ball machine use) | |
| enforcerlight_linkage | bool | Red and blue indicator linkage alarm | |
| siren_linkage | bool | Alarm sound linkage alarm | |
| http_listening | bool | http event push | |
| schedule | Object | The schedule is displayed as followsTable 8 | |
| default_timeout | 1-120000 | int | Session timeout (range usage) |
Table 5
| Parameter | Range | Type | Description |
|---|---|---|---|
| rule_number1 | Object | Rule number 1, the information JSON is displayed as follows Table 6 | |
| rule_number2 | Object | Rule number 2, the information JSON is displayed as follows Table 6 | |
| rule_number3 | Object | Rule number 3, the information JSON is displayed as follows Table 6 | |
| rule_number4 | Object | Rule number 4, the information JSON is displayed as follows Table 6 |
Table 6
| Parameter | Range | Type | Description |
|---|---|---|---|
| rule_switch | bool | rule switch | |
| rule_rect | Object | Rectangle, the information JSON is as follows Table 7 | |
| point_num | [min:max] | array | The number of points drawn in the area, minimum 3 points (min), maximum 8 points (max) |
Table 7
| Parameter | Range | Type | Description |
|---|---|---|---|
| x1 | 0-704 | short | x1 coordinate point |
| y1 | 0-576 | short | y1 coordinate point |
| x2 | 0-704 | short | x2 coordinate point |
| y2 | 0-576 | short | y2 coordinate point |
| x3 | 0-704 | short | x3 coordinate point |
| y3 | 0-576 | short | y3 coordinate point |
| x4 | 0-704 | short | x4 coordinate point |
| y4 | 0-576 | short | y4 coordinate point |
| x5 | 0-704 | short | x5 coordinate point |
| y5 | 0-576 | short | y5 coordinate point |
| x6 | 0-704 | short | x6 coordinate point |
| y6 | 0-576 | short | y6 coordinate point |
| x7 | 0-704 | short | x7 coordinate point |
| y7 | 0-576 | short | y7 coordinate point |
| x8 | 0-704 | short | x8 coordinate point |
| y8 | 0-576 | short | y8 coordinate point |
Table 8
| Parameter | Range | Type | Description |
|---|---|---|---|
| schedule_type | "SendEmail" "FtpPicUpload" "CloudPicUpload" "Record" "AlarmOut" "FtpVdUpload" "CloudVdUpload" "FloodLight" "Siren" "EnforcerLight" | string | Schedule type |
| week | Obejct | Weekly information such as Table 9 |
Table 9
| Parameter | Range | Type | Description |
|---|---|---|---|
| day | "Sun" "Mon" "Tue" "Wed" "Thu" "Fri" "Sat" | string | day |
| time | int | time |
Sample:
HTTP/1.1 200 OK
Content-Type: application/json
{
"result": "success",
"data": {
"channel_max": 1,
"channel_info": {
"type": "object",
"items": {
"CH1": {
"type": "object",
"items": {
"status": {
"description": "Only offline channel has this variable.",
"type": "string",
"mode": "r",
"items": [
"Offline",
"Online",
"Nonsupport"
]
},
"switch": {
"type": "bool"
},
"sensitivity": {
"type": "int32",
"min": 1,
"max": 100
},
"iva_lines": {
"type": "bool"
},
"detection_type": {
"type": "array",
"min_size": 0,
"max_size": 3,
"items": {
"type": "string",
"items": [
"Pedestrian",
"Motor Vehicle",
"Non-motorized Vehicle"
]
}
},
"target_validity": {
"type": "int32",
"items": [
1,
2,
3,
4
]
},
"max_pixel": {
"type": "int32",
"min": 320,
"max": 1080
},
"min_pixel": {
"type": "int32",
"min": 64,
"max": 1080
},
"rule_info": {
"type": "object",
"items": {
"rule_number1": {
"type": "object",
"items": {
"rule_switch": {
"type": "bool"
},
"point_num": {
"type": "array",
"size": 2,
"items": []
},
"rule_rect": {
"type": "object",
"items": {
"x1": {
"type": "int32",
"min": 0,
"max": 704
},
"x2": {
"type": "int32",
"min": 0,
"max": 704
},
"x3": {
"type": "int32",
"min": 0,
"max": 704
},
"x4": {
"type": "int32",
"min": 0,
"max": 704
},
"x5": {
"type": "int32",
"min": 0,
"max": 704
},
"x6": {
"type": "int32",
"min": 0,
"max": 704
},
"x7": {
"type": "int32",
"min": 0,
"max": 704
},
"x8": {
"type": "int32",
"min": 0,
"max": 704
},
"y1": {
"type": "int32",
"min": 0,
"max": 576
},
"y2": {
"type": "int32",
"min": 0,
"max": 576
},
"y3": {
"type": "int32",
"min": 0,
"max": 576
},
"y4": {
"type": "int32",
"min": 0,
"max": 576
},
"y5": {
"type": "int32",
"min": 0,
"max": 576
},
"y6": {
"type": "int32",
"min": 0,
"max": 576
},
"y7": {
"type": "int32",
"min": 0,
"max": 576
},
"y8": {
"type": "int32",
"min": 0,
"max": 576
}
}
}
}
},
"rule_number2": {
"type": "object",
"items": {
"rule_switch": {
"type": "bool"
},
"point_num": {
"type": "array",
"size": 2,
"items": []
},
"rule_rect": {
"type": "object",
"items": {
"x1": {
"type": "int32",
"min": 0,
"max": 704
},
"x2": {
"type": "int32",
"min": 0,
"max": 704
},
"x3": {
"type": "int32",
"min": 0,
"max": 704
},
"x4": {
"type": "int32",
"min": 0,
"max": 704
},
"x5": {
"type": "int32",
"min": 0,
"max": 704
},
"x6": {
"type": "int32",
"min": 0,
"max": 704
},
"x7": {
"type": "int32",
"min": 0,
"max": 704
},
"x8": {
"type": "int32",
"min": 0,
"max": 704
},
"y1": {
"type": "int32",
"min": 0,
"max": 576
},
"y2": {
"type": "int32",
"min": 0,
"max": 576
},
"y3": {
"type": "int32",
"min": 0,
"max": 576
},
"y4": {
"type": "int32",
"min": 0,
"max": 576
},
"y5": {
"type": "int32",
"min": 0,
"max": 576
},
"y6": {
"type": "int32",
"min": 0,
"max": 576
},
"y7": {
"type": "int32",
"min": 0,
"max": 576
},
"y8": {
"type": "int32",
"min": 0,
"max": 576
}
}
}
}
},
"rule_number3": {
"type": "object",
"items": {
"rule_switch": {
"type": "bool"
},
"point_num": {
"type": "array",
"size": 2,
"items": []
},
"rule_rect": {
"type": "object",
"items": {
"x1": {
"type": "int32",
"min": 0,
"max": 704
},
"x2": {
"type": "int32",
"min": 0,
"max": 704
},
"x3": {
"type": "int32",
"min": 0,
"max": 704
},
"x4": {
"type": "int32",
"min": 0,
"max": 704
},
"x5": {
"type": "int32",
"min": 0,
"max": 704
},
"x6": {
"type": "int32",
"min": 0,
"max": 704
},
"x7": {
"type": "int32",
"min": 0,
"max": 704
},
"x8": {
"type": "int32",
"min": 0,
"max": 704
},
"y1": {
"type": "int32",
"min": 0,
"max": 576
},
"y2": {
"type": "int32",
"min": 0,
"max": 576
},
"y3": {
"type": "int32",
"min": 0,
"max": 576
},
"y4": {
"type": "int32",
"min": 0,
"max": 576
},
"y5": {
"type": "int32",
"min": 0,
"max": 576
},
"y6": {
"type": "int32",
"min": 0,
"max": 576
},
"y7": {
"type": "int32",
"min": 0,
"max": 576
},
"y8": {
"type": "int32",
"min": 0,
"max": 576
}
}
}
}
},
"rule_number4": {
"type": "object",
"items": {
"rule_switch": {
"type": "bool"
},
"point_num": {
"type": "array",
"size": 2,
"items": []
},
"rule_rect": {
"type": "object",
"items": {
"x1": {
"type": "int32",
"min": 0,
"max": 704
},
"x2": {
"type": "int32",
"min": 0,
"max": 704
},
"x3": {
"type": "int32",
"min": 0,
"max": 704
},
"x4": {
"type": "int32",
"min": 0,
"max": 704
},
"x5": {
"type": "int32",
"min": 0,
"max": 704
},
"x6": {
"type": "int32",
"min": 0,
"max": 704
},
"x7": {
"type": "int32",
"min": 0,
"max": 704
},
"x8": {
"type": "int32",
"min": 0,
"max": 704
},
"y1": {
"type": "int32",
"min": 0,
"max": 576
},
"y2": {
"type": "int32",
"min": 0,
"max": 576
},
"y3": {
"type": "int32",
"min": 0,
"max": 576
},
"y4": {
"type": "int32",
"min": 0,
"max": 576
},
"y5": {
"type": "int32",
"min": 0,
"max": 576
},
"y6": {
"type": "int32",
"min": 0,
"max": 576
},
"y7": {
"type": "int32",
"min": 0,
"max": 576
},
"y8": {
"type": "int32",
"min": 0,
"max": 576
}
}
}
}
}
}
}
}
}
}
}
}
}
Error Code
See Response Messages Body and Common error_code for more information.