Revision History
Software version | Change log | Author | Date |
---|---|---|---|
2.040 | 1.AddFunction > DoorBellConfig configure the use of mechanical bells. 2.AddFunction > OperateElectronicBell pair electronic bells. 3.AddFunction > LEDStatus LED switch status Getting and setting。 4. > Login > Login > DeviceInfo > get > 表格2DeviceInfo Capability Added the doorbell device field"is_doorbell_device"。 | zhongshengwei | 2025-02-07 |
2.039 | 1.Event Settings(cloud dedicated) > Settings > Range > Table 1 Modify the range value of field "abilities" to add "HumanDetection", "ParcelDetection", and "WanderDetection". 2.AddAI > Setup > ParcelDetection Parcel Detection。 3.AddAI > Setup > WanderDetection Wander Detection. | zhongshengwei | 2025-02-06 |
2.038 | 1.Event > Event check & Event pus > table 2Added new fields "storage_disk_refresh" 2.Event > Event check & Event pus > table 7、Login > ChannelInfo > Get > Table 2 Add key "DsDistance"、"RegionFocus" to the field "ability" 3.Add Login > PreviewChannel > RegionFocus 4.Storage > Disk > Disk Configuration > Range > Table 2Add key "Formatting" to the field "status" 5.Stream > Encode > Range > Table 2 Added new fields "etr_sync_items" 6.Add System > ImageStitching | zhengjiehong | 2025-1-24 |
2.037 | 1.Login > RemoteAbilityStatusAdded the API for NVR to set the privacy mode:Login/RemoteAbilityStatus/Set | zhongshengwei | 2025-1-24 |
2.036 | 1.Login > Login > DeviceInfo > Get > Table 2 Added new fields "support_linkage_takeover", "device_type_cloud". | chenbangtao | 2025-1-23 |
2.035 | 1.Login > DeviceInfo > Get > Table 2Change the range value of "push_type" from RSPush to SelfPush | zhongshengwei | 2025-1-20 |
2.034 | 1.Alarm > Disarming > Range Added new fields "extern_alarm_channel_datasame" and "build_in_channel_datasame" used for syncing interface parameters 2.Alarm > Floodlight > Range Added new fields "channels_items_datasame" ,"datasame_items" and "datasame_channels" used for syncing interface parameters. 3.Alarm > Voice Prompts > Range Added new fields "channels_items_datasame" ,"datasame_items" and "datasame_channels" used for syncing interface parameters. 4.Channel > OSD > Range Added new fields "channels_items_datasame" ,"datasame_items" and "datasame_channels" used for syncing interface parameters. 5.Event Settings(cloud only) > Alarm Linkage > Range Added new fields "voice_prompts_select_datasame" used for syncing interface parameters. 6.Maintenance > IPCMaintenance > IPC Disk > Range Added new fields "channels_items_datasame" ,"datasame_items" and "datasame_channels" used for syncing interface parameters. 7.Maintenance > IPCMaintenance > IPCParamManagement > Range Added new fields "channels_items_datasame" ,"datasame_items" and "datasame_channels" used for syncing interface parameters. 8.Maintenance > IPCMaintenance > IPCReboot > Range Added new fields "channels_items_datasame" ,"datasame_items" and "datasame_channels" used for syncing interface parameters. 9.Maintenance > IPCMaintenance > IPCUpgrade > Range Added new fields "channels_items_datasame" ,"datasame_items" and "datasame_channels" used for syncing interface parameters. 10.Maintenance > IPCMaintenance > Load Default > Range Added new fields "channels_items_datasame" ,"datasame_items" and "datasame_channels" used for syncing interface parameters. 11.Storage > Audio > Range Added new fields "channels_items_datasame" ,"datasame_items" and "datasame_channels" used for syncing interface parameters. | 陈仕涛 | 2025-01-18 |
2.033 | 1.Login > DeviceInfo > Get > Table 2 Add new field "speaker_alarm" and "speaker_talk_samplerate", example of changing Get. 2.Alarm > IO Alarm > Get Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 3.Alarm > CombinationAlarm > Set Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 4.Alarm > CombinationAlarm > Get Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 5.Alarm > Exception > Range Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 6.AI > Recongnition > License Plate Group > Get Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 7.Alarm > IO Alarm> Set Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 8.Alarm > Perimeter Intrusion Detection> Range Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 9.Alarm > Line Crossing Detection> Range Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 10.Alarm > Sound Detection> Get Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 11.Alarm > CombinationAlarm > Range(cloud dedicated) Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 12.Alarm > Exception > Get Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 13.Alarm > Stationary Object Detection > Get Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 14.Alarm >Stationary Object Detection > Range Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 15.Alarm > PIR > Range Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 16.Alarm > PedestrianDetection > Range Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 17.Alarm > Motion Alarm > Range Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 18.Alarm > FaceDetection > Range Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 19.Alarm > CrossCounting > Range Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 20.Alarm > CombinationAlarm > Range Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 21.Alarm > Http_listening_Push related description > post > API Add new field "VoicePromptsSpkSel" Used for voice broadcast linkage IP Speaker. 22.Event > Stationary Object Detection > Set Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 23.Alarm > PIR > Set Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 24.Alarm > Perimeter Intrusion Detection > Set Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 25.Alarm > Occlusion Detection > Set Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 26.Alarm > Occlusion Line Crossing Detection > Set Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 27.Alarm > Exception > Set Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 28.Alarm > Perimeter Intrusion Detection > Get Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 29.Alarm > PedestrianDetection > Set Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 30.Alarm > PedestrianDetection > Get Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 31.Alarm > Occlusion Detection > Get Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 32.Alarm > Motion Alarm > Set Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 33.Alarm > Sound Detection > Set Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 34.Alarm > Line Crossing Detection > Get Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 35.Alarm > FaceDetection > Set Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 36.Alarm > FaceDetection > Get Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 38.Alarm > CrossCounting > Get Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 39.Alarm > CombinationAlarm > Set Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 40.Alarm > CombinationAlarm > Get Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 41.Alarm > VoicePrompts > Get Add new field "voice_speaker_info" Used for voice broadcast linkage IP Speaker. 42.Alarm > Sound Detection > Range Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 43.Alarm > Occlusion Detection > Range Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 44.Alarm > IO Alarm(cloud dedicated) > Alarm Input > Range Add new field "voice_prompts_speaker_select" Used for voice broadcast linkage IP Speaker. 45.AI > Recongnition > License Plate > Add Add new field "VoicePromptsSpkSel" Used for voice broadcast linkage IP Speaker. 46. Login > DevicePage > Pages > Level 3 Menu : New page IP Speaker。 47. Alarm > IP Speaker > API : New API interface。 48. Alarm > IP Speaker > Get : New API interface。 49. Alarm > IP Speaker > Range : New API interface。 50. Alarm > IP Speaker > Set : New API interface。 | huwanyu | 2025-01-15 |
2.032 | 1.Alarm > Exception > Range > Table 2 Add a "power_abnormal" field to identify a power supply exception。 2.Event > Event_check&Event_push > Get&Push > Table 3 Add the "abnormal fans" field for fan abnormal alarm and the "wrong_power_number" field for identifying a power supply abnormality。 3.Login > Login > DeviceInfo > Table 2 Added a "wrong_power_number" field to report an abnormality in a power supply, and a "abnormal fans" field to report an abnormality in a fan | Wang Zhen | January 8, 2025 |
2.031 | 1.AI > Setup > Face Detection > get > Table 4 add face enhancement mutually exclusive related fields. 2.AI >Setup > License Plate Detection > Range > Table 3 add mutually exclusive related fields for license plate enhancement. 3.Event Settings(cloud dedicated > Alarm Linkage > Range > Table 6) add fields related to ptz linkage. 4.Alarm > Io Alarm(cloud dedicated) > Alarm Input > Range > Table 3 add fields related to ptz linkage on the I/O page. | zhangjianmin | 2025-01-04 |
2.030 | 1.Stream > Encode > Range > Table 4 add "etr_disable" field for disable the event stream parameter option. 2. Maintenance > Log > get > Table 3 add "SN" and "sub_type_holder" field for display disk loss logs. 3. Channel > Image Control > Range Table 4 add "anti_overexpoure" field for display the Anti Overrexposure switch. | zhangjianmin | 2025-01-03 |
2.029 | 1. > Channel > IPChannel > Table 3 New fields such as' support_channel_num_idit 'have been added to add editing options for hidden parts of the multi view IPC. 2. > Channel > POE Power Add POE Power settings API and related fields. 3. > Nerwork > Email Add POE Power settings API and related fields. | lihongbo | 2024-12-31 |
2.028 | 1. > Login > Login > DeviceInfo > get > Table 2 Add "certificate_change "field for re-exporting certificates after they have expired. 2. > Login > Login > Range > Table 1 The "videoloss_logo_replace" field was added to support video lost logo replacement using the tool. 3. > Login > RecoverPassword > Certificate > Export> Table 1 Added a "operate" field to cancel the export of a certificate. 4. > Login > RecoverPassword > Certificate > Export > Table 2 Lengthen the "certificate" field to make the certificate code more secure. 5. > Login > RecoverPassword > Range > Table 1 Added a "clickok_must_selectOne" field for when a password recovery method must be selected. 6. > Maintenance > FtpUpgrade > Progress > Table 1 The "upgrade_percent" field has a new type, "upgrade_download_succeed", which is used when the upgrade file has been downloaded. 7. > Common > CommonError_code Added a new field called "upgrade_environmentvar_different" to handle failed upgrades caused by partition changes. | dengqing | 2024-12-31 |
2.027 | 1.Add Maintenance > IPCMaintenance > IPC Disk (cloud dedicated). | chenbangtao | 2024-12-30 |
2.026 | 1.Alarm > PTZLinkageControl(cloud dedicated)Add the NVR opens a PTZ linkage control API:LinkageConfig/PTZLinkageControl/Set | zhongshengwei | 2024-12-30 |
2.025 | 1.Add AI > Recongnition > Appearance Frequency. | chenbangtao | 2024-12-30 |
2.024 | 1.Stream > Encode > Range > Table 4 add "etr_fps_unbind_etr_i_frame_interval". | zhangjianmin | 2024-12-30 |
2.023 | 1.Maintenance > Auto Reboot > Range > Table 1 Add the "secondy_authentication" field for secondary authentication during automatic restart. 2.Stream > Capture > Range > Table 4 Add the "capture_resolution" field to set the capture resolution. 3.Event > Event_check&Event_push > Get&Push > Table 2 Add the "devInfo_ftp_check_update" Notify the client that the new version cannot be detected anymore. | wushuiquan | 2024-12-27 |
2.022 | Add APIs related to dome camera's automatic tracking: 1.Event Settings(cloud dedicated) > Tracking. 2.Event Settings(cloud dedicated) > Alarm Linkage add "tracking_link", "tracking_link_btns". | chenbangtao | 2024-12-27 |
2.021 | 1.Maintenance > Log > Get > Table 3 Add the "eventsetting" search event type field to the sub_type field,Modify the search fields in the 'Template Schedule' schedule, and modify the search fields in the 'DisarmSchedule' schedule on the Disarm page,Set the privacy mode search field in "VideoPrivacy", and enable or disable the cloud service search field in "CloudServer". 2.Channel > Video Color > Range > Table 4 Add "rulebox_font_comor" thermal imaging rule color field. 3.Channel > Video Cover > Range > Table 4Add a "show_tips" setting for occlusion area prompt box. 4. Stream > Encode > Range > Table 4Add a 'mutual_exclusion' field for intelligent and stream exclusive use. 5.Alarm > CombinationAlarm > Range > Table 3Add fields for linkage alarm "com_fired" fire detection and "com_tm" temperature detection. 6.Channel > Image Control > Range > Table 3Add a digital image stabilization field for "dis_level" settings. 7.AI > Setup > License Plate Detection > Range > Table 3Add LPD license plate enhancement and day night mode mutually exclusive "lpdenhance_prompt" field. 8.Alarm > Motion Alarm > Range > Table 4Add "mutual_ability" and intelligent mutual exclusion fields. 9.AI > Recongnition > Face Group > Get > Table 2Add whether "export_no_permission" has permission to export fields. | zhaorulong | 2024-12-27 |
2.020 | 1.Nerwork > Network Configuration > Network Base > Range > Table1 Modify Fields "net_card_mode" 2.Nerwork > Network Configuration > Network Base > Range > Table2 Add fields "Client_or_Server" | lingjiali | 2024-12-27 |
2.019 | 1.AI > Recongnition > Face Group > Get > Table2 Add fields"controls"。 | liguoqiang | 2024-12-27 |
2.018 | 1.AI > Recongnition > License Plate Group > Get > Table2 Add fields"controls"。 | liguoqiang | 2024-12-27 |
2.017 | 1.Channel > Channel Configuration > IPChannel > Range > Table 5 Add key "onvif_unknown"。 | heshaoxiong | 2024-12-27 |
2.016 | 1.Login > DeviceInfo > Get > Table 2 Supplementary Description Missing fields of the interface for obtaining device information | zhongshengwei | 2024-12-26 |
2.015 | 1.Login > Request pubkey or randbyte > README Modified the size of the aes256gcm key to 32 bits | zhongshengwei | 2024-12-26 |
2.014 | Add APIs related to resuming upgrade upon network disconnection: Maintenance > IPCMaintenance > IPCUpgrade > Get Breakpoint Maintenance > SystemUpgrade > Get Breakpoint Maintenance > IPCMaintenance > IPCUpgrade > Token > Table 2 add "resume_timeout" Maintenance > SystemUpgrade > Token > Table 2 add "resume_timeout" | chenbangtao | 2024-12-26 |
2.013 | In Network > snmp > Range > Table 1, add remark for "snmp_versions" and a new field "level". In Network > IEEE8021x > Range > Table 1, add a new enumeration type "LEAP" for "authentication_type" and a new field "eapol_ver". | lixiang | 2024-09-26 |
2.012 | 1.Login > DeviceInfo > Get > Table 2 Supplementary Description Missing fields of the interface for obtaining device information | zhongshengwei | 2024-12-26 |
2.011 | 1.Login > Request pubkey or randbyte > README Modified the size of the aes256gcm key to 32 bits | zhongshengwei | 2024-11-23 |
2.010 | 1.Network Configuration > Network Base > Table 1 Add key "audio_encrypt_transfer". | zhong shengwei | 2024-09-20 |
2.009 | 1.Add DisarmingLinkage under the Alarm | lijiarong | 2024-09-20 |
2.008 | Adjust the structure of the Event section and correct the erroneous expressions within it. | chenbangtao | 2024-08-25 |
2.007 | 1.Maintenance > Log > Get > Table 3 Added "PowerAbnormal" as a "sub_type" response result. | zhengjiehong | 2024-08-14 |
2.006 | 1.Add Record Schedule under the Record chapter. | chenbangtao | 2024-07-22 |
2.005 | 1. Alarm > CombinationAlarm > Get : Modify the value of key "enable_alarm". 2. Alarm > CombinationAlarm > Range > table 4 : Modify the value of key "enable_alarm". 3. Alarm > CombinationAlarm > Set : Modify the value of key "enable_alarm". 4. Channel > Channel Configuration > IPChannel > Get : Added the value of key "forward_port_protocol_type". 5. Channel > Channel Configuration > IPChannel > Range > table 5 : Added the value of key "forward_port_protocol_type". 6. Channel > Channel Configuration > IPChannel > Set : Added the value of key "forward_port_protocol_type". | chenchun | 2024-07-04 |
2.004 | 1. Maintenance > ResetSettings > API : Added new API interface. 2. Maintenance > ResetSettings > Get : Added new API interface. 3. Maintenance > ResetSettings > Range : Added new API interface. 4. Maintenance > ResetSettings > Set : Added new API interface. | huwanyu | 2024-06-03 |
2.003 | 1.Thermal > Fire Detection:Thermal > Fire Detection > Table 1delete add delete api request, Thermal > Fire Detection > Range > Table 1 delete fields in Table4 region_shield,delete Old Table 6、7、8、102.Thermal > Measurement >Rangedelete fields in Table4 data_refresh_rate | lixiao | 2024-05-22 |
2.002 | 1. Nerwork > Rtsp : Range > Table 1 and Set > Table 1: Add metadata_platform field,example of changingRange, Get, Set. 2. Maintenance > Log > Range > Table 1 : Change response message example, change fields main_type scope. 3. Maintenance > Log > Get > Table 1 : Change fields main_type scope. 4. Maintenance > Log > Get > Table 3 : Change response message example, change fields main_type scope. | jiang zhuoyun | 2023-01-11 |
2.001 | 1.In Table 2 of Push > Push > Query, add the value of key "Notification". 2.In Table 3 of Push > Push > Query, remove the value of key "StorageReadOnly". 3.In Table 3 of Push > Push > Query, add the value of key "Intrusion","RegionEntrance","RegionExiting","LPR". 4.In Table 6 of Push > Push > Query, add the value of key "AiHuman","AiVehicle","Intrusion","RegionEntrance","RegionExiting","AiFaceDetection","LPR". 5.In Push > Push > Query, add Table 8. 6.In Push > Push > Query, add Table 9. 7.In Table 2 of Push > Push > Subscribe, add the value of key "UUID". 8.In Push > Push > Subscribe, remove Table 3. 9.In [Push > Push > Unsubscribe]Push > Push > Subscribe, add Table 1. 10.In Table 2 of Push > PushSubscribe > Get, add the value of key "Human","Vehicle","IntrusionAlarm","RegionEntranceAlarm","RegionExitingAlarm","AiFaceDetection","LPRAlarm". 11.In Push > PushSubscribe > Get, add Table 5. 12.In Push > PushSubscribe > Get, add Table 6. 13.In Table 1 of Network > DDNS > Range, add the value of key "api_key","api_key_empty","base_enc_api_key","api_key_url". 14.Modify Network > VoiceAssistant. | zhengjiehong | 2024-01-10 |
2.000 | In Table 4 of Alarm > CrossCounting > Range, modify the value of key "rule_rect". In Table 5 of Alarm > LinkageSchedule > Range, modify the value of key "schedule_type". In Table 3 of Login > PreviewChannel > PTZ > Get, move keys "ptz_version" and "channel" to Table 2, and add value "3.0" to "ptz_version". | chen bangtao | 2024-01-09 |
1.0.58 | 1, Channel > Image Control > Range > Table 4: Add max_zoom_ratio field | jiang zhuoyun | 2023-01-09 |
1.057 | Network Add IEEE8021x function | Tan Tiantian | 2023-12-18 |
1.056 | 1.Network Add GB28181 function 2. Network > FTP > Range > Table 1: Add upload_picture, upload_video field 3.Network > Network Configuration > Network Base > Range: Table 1:Add manual_ip_conflict field,Form Table 2 ipv6_dns1, ipv6_dns2, connection_protocol Equal field,Form Table 6 network_mode_type field 4.Nerwork > Network Configuration > WLAN > join > Table 1: Add network_mode_type, ip_address, subnet_mask, gateway Equal field 5.Network > Rtsp > Range > Table 1: Add notSupportMobile, ipeye_enable, ipeye_link Equal field | Tan Tiantian | 2023-11-9 |
1.055 | 1.Alarm > Floodlight > Range > Table 2: Add channel_max field 2. Alarm > Floodlight > Range > Table 4: Add flood_light_switch, flood_light_disable, warning_light_disable, button_control, save_visible, default_visible, param_video, show, disable field 3. Alarm > Floodlight > Range > Table 4: Delete dualtalk_volume field 4. Alarm > IO Alarm > Range > Table 4: Delete snap_enable field 5.Alarm > IO Alarm > Range > Table 4: Add record_enable, light_linkage, enforcerlight_linkage, siren_linkage, flame_detection, http_listening, schedule field 6. Alarm > IO Alarm > Range Add Table 5 and Table 6 7. Alarm > MOtion Alarm > Range > Table 4: Delete rect field 8. Alarm > MOtion Alarm > Range: Delete Table 5 9. Alarm > MOtion Alarm > Range > Table 4: Add smart_moiton_detection, target_type, enforcerlight_linkage, siren_linkage, http_listening, schedule field 10. Alarm > MOtion Alarm > Range:Add Table 6,Table 7 11. Alarm > Occlusion Detection > Range > Table 4: Add enforcerlight_linkage, siren_linkage, http_listening, schedule field 12. Alarm > Occlusion Detection > Range > Table 4: Add Table 5, Table 6 13. Alarm > PIR > Range > Table 4: Add enforcerlight_linkage, siren_linkage, http_listening, schedule field 14. Alarm > PIR > Range: Add Table 6, Table 7 15.Alarm > PIR > Range > Table 4: Delete detection_type, iva_lines, rule_info, scene field 16. Alarm > PIR > Range: Delete Table 5 17. Alarm > Sound Detection > Range > Table 4: Add http_listening field 18. Alarm > Voice Alarm > Range > Table 1:Add channel field 19.Alarm > Voice Alarm > Range > Table 3: Add siren_type_content, delete_button field 20. Alarm > Voice Alarm > Import > Table 1: Add channel field 21. Alarm > Voice Alarm > Import > Table 3: Add file_name field | qiudan | 2023-11-9 |
1.054 | 1.Event > Event_check&Event_push > Get&Push > Table 5:Delete low_power, charge_power, input_num, output_num field 2.Event > Event_check&Event_push > Get&Push > Table 7: Delete input_num, output_num field 3.Event > Event_check&Event_push > Get&Push > Table 8: Delete audioAlarm_trigger field 4.Event > Event_check&Event_push > Get&Push > Table 18: Modify field hm_data_type is hm_datatype 5.Event > Event_check&Event_push > Get&Push > Table 1 : Add subscribe_id, data_pos field 6.Event > Http listening > Range > Table 3: Delete duplicate fields password_empty 7.Event > Http listening > Get > Table 7: Add field BgImgWidth, , BgImgHeight, ImageAllInfo 8.Event > Http listening > Get > Table 8 Add field MD5, BgImgWidth, BgImgHeight, Beauty, Similarity, ImageAllInfo, Image1, Image3, Feature 9.Event > Http_listening_Push related description > POST > Table 4: Add field BgImgWidth, , BgImgHeight, ImageAllInfo 10.`Event > Http_listening_Push related description > POST > Table 5: Add field MD5, BgImgWidth, BgImgHeight, Beauty, Similarity, ImageAllInfo, Image1, Image3, Feature | qiudan | 2023-11-7 |
1.053 | 1.Stream > Encode > Range > Table 4 Add video_encode_type_resolution_range, codeparam_setting_notice field 2. Stream > Encode > Range > Table 4: Delete i_frame_interval_rate field | qiudan | 2023-11-6 |
1.052 | 1. AI > Setup > Heat Map > Get > Table 4: Add schedule_enable和ptz_operation_support field 2. AI > Setup > Human & Vehicle Detection > Range > Table 3:Add schedule_enable, ptz_operation_support, detection_mode, scene, light_linkage, tracking_link, enforcerlight_linkage, siren_linkage, http_listening, schedule, default_timeout field 3. AI > Setup > Intrusion > Range > Table 4: Add schedule_enable, ptz_operation_support, light_linkage, tracking_link, enforcerlight_linkage, siren_linkage, http_listening, iva_lines, schedule, default_timeout field 4. AI > Setup > License Plate Detection > Range > Table 3: Add schedule_enable, ptz_operation_support, point_num, light_linkage, enforcerlight_linkage, siren_linkage, http_listening, detection_type, schedule, default_timeout field 5. AI > Setup > Line Crossing Detection > Get > Table 4 : Add schedule_enable, ptz_operation_support, scene, light_linkage, enforcerlight_linkage, siren_linkage, http_listening, schedule, tracking_link, default_timeout field 6. AI > Setup > Queue Lenght Detection > Range > Table 3: Add schedule_enable, ptz_operation_support, video_to_cloud, enforcerlight_linkage, siren_linkage, http_listening, schedule, default_timeout field,Table 5 Add point_num field 7.AI > Setup > Rare Sound Detection > Range > Table 3: Add schedule_enable, light_linkage, enforcerlight_linkage, siren_linkage, http_listening, schedule field 8.AI > Setup > Region Entrance > Range > Table 3:Add schedule_enable, ptz_operation_support, iva_lines, light_linkage, tracking_link, enforcerlight_linkage, siren_linkage, http_listening, schedule, default_timeout field 9.AI > Setup > Region Exiting > Range > Table 4: Add schedule_enable, ptz_operation_support, iva_lines, light_linkage, tracking_link, enforcerlight_linkage, siren_linkage, http_listening, schedule, default_timeout field 10. AI > Setup > Stationary Object Detection > Get > Table 4: Add schedule_enable, ptz_operation_support, scene, light_linkage, enforcerlight_linkage, siren_linkage, http_listening, schedule field. Table 6 Add point_num field | Tan Tiantian | |
1.051 | 1. AI > Setup > AI Func Schedule > Range > Table 4 :Add mutex_type_between_channel field 2. AI > Setup > Stationary Object Detection > Get > Table 4: Delete record_channel field 3. AI > Setup > Crowd Density Detection > Range > Table 3 :Add video_to_cloud field 4. AI > Setup > Face Detection > Get > Table 4:Delete record_channel field 5. AI > Setup > Face Detection > Get > Table 4: Add schedule_enable, ptz_operation_support, ftp_picture_upload, picture_to_cloud, ftp_video_upload, video_to_cloud, light_linkage, enforcerlight_linkage, siren_linkage, http_listening, schedule, default_timeout field 6. AI > Setup > Cross Counting > Get > Table 4: Add schedule_enable, ptz_operation_support, light_linkage, enforcerlight_linkage, siren_linkage, http_listening, schedule, default_timeout, iva_lines, scene field 7. AI > Setup > Cross Counting > Get > Table 4: Add schedule_enable, ptz_operation_support, enforcerlight_linkage, siren_linkage, http_listening, schedule, default_timeout field Table 5 Add point_num field 8.API > THERMAL: New chapter on thermal imaging added | Tan Tiantian | 2023-11-3 |
1.050 | In chapter NETWORK: In Network Configuration > Network Base > Table 1 : Add key "operation_type", "manual_ip_conflict". In Network Configuration > Network Base > Table 2 : Add key "ipv6_dns1", "ipv6_dns2", "connection_protocol". In Network Configuration > Network Base > Table 3 : Add key "modify_field", "show_tips". In Network Configuration > Network Base > Table 6 : Add key "network_mode_type". In Network Configuration > Network Base > Table 10 : Add key "modify_field", "show_tips". In Nerwork > Email > Range > Table 1 : Add key "report_button". In Nerwork > FTP > Range > Table 1 : Add key "upload_picture", "upload_video". In Nerwork > Rtsp > Range > Table 1 : Add key "rtsp_url", "notSupportMobile", "ipeye_link". In chapter ALARM: In Motion Alarm > Range > Table 4 : "status" 的 value Add "Nonsupport". In PIR > Range > Table 4 : "status" 的 value Add "Nonsupport". In Flood-light > Range > Table 2 : Add key "channel_max". In Perimeter Intrusion Detection > Range > Table 6 : Add key "rule_switch". In FaceDetection > Range > Table 2 : Add key "support_copy", "agreed_to_agreement", "statement_file_name". In Cross Counting > Range > Table 2 : Add key "support_copy". In Cross Counting > Range > Table 4 : Add key "is_ai_param", "detection_type", "alarm_num", "start_time", "end_time", "reset_count", "schedule_enable", "ptz_operation_support". In Cross Counting > Range > Table 6 : Add key "rule_rect". In IntelligentAnalysis > ange > Table 3 : Add key "status", "detection_type",Delete key "Perimeter_Intrusion_Detection", "Line_Crossing_Detection", "Stationary_Object_Detection", "Pedestrian_Detection", "Cross_Counting" In LinkageSchedule > Range > Table 1 : "page_type" Add value "EnforcerLight". In Disarming > Range > Table 2 : Add key "event_push_platform". In chapter MAINTENANCE: In Log > log > Table 3 : "ai_main_type" 的 value 增加 "License Plate Detection". In Load Default Parameter > Range > Table 1 : Add key "default_timeout",delete Table-11.2.2 of the old document. In Ftp Upgrade > Range >Table 1 : Add key "online_upgrade_tips", "check_for_updates", "cur_version", "new_version", "ipc_online_upgrade_tip", "Upgrade_button", "inSystemUpgradefo_file_url". In Ftp Upgrade > Range >Table 1 : Add key "check_for_updates". In Ftp Upgrade > Check > Table 1 : Add key "Upgrade_button", "lang_strs". In IPC Maintenance > Range > Table 1 : Add key "upgrade_result". In IPC Maintenance > Check : Change /API/IPCMaintaint/FtpIpcUpgrade/Check Response content. In System Upgrade > VersionCheck : Add Maintenance/SystemUpgrade/VersionCheck Response content In DeveloperMode > Range > Table 1 : Add key "support_ipc_log_export", "search_log_enable", "support_ipc_log_pack", "log_collect_tips", "download_type", "support_ipc_log_delete", "export_days", "channel_info". In DeveloperMode > Clear > Table 1 : Add key "delete_type". In DeveloperMode > Token : /API/Maintenance/DeveloperMode/Token add Request content. Delete section Http Upgrade. In chapter LOGIN: In Login > DeviceInfo > Get > Table 1 : Add key "support_camera_day_night_param". In Login > DeviceInfo > Get > Table 2 : Delete key "max_analog_chn". In Login > ChannelInfo > Get > Table 2 : "intelligent_ability" Add value "FireDetection", "TempMeas". In FirstLogin > Password > Get > Table 1 : Add key "activation_pwd",Delete key "password". In PreviewChannel > PTZ > Get > Table 2 : Delete key "cruise_state". | chen bangtao | 2023-10-30 |
1.049 | 1. System > System Information > Get > Table 1:Add the"mcu_software_version" field to Get Table 1 2. System > Channel > Information > API:Fixed the URI of the API file 3. Storage > Disk > Disk Configuration > Range:Table 1New fields "support_format" and "default_timeout" in Table 1 and "TotalSize" in Table 3 4. API > Storage > Cloud:Appending the accesstoken index in API.md 5 Record > Search Record:Add Range.md file, append Range index to API.md 6.Record > Playback Page > API:Remove links to Get.md and Set.md from documents 7.Maintenance > Load Default Parameter > Range > Table 1:Change the Range field alarm to event, and add the "default_timeout" field to Range Table 1 8. Maintenance > FtpUpgrade::Fixed Progress Request URI, add "ipc_online_upgrade_tip" and "Upgrade_button" fields to table 1 of Range > Table 1 9. Maintenance > Import_Export Parameter:Fixed the correct Get and Set request URI 10.Maintenance > IPCMaintenance > FtpIpcUpgrade:Fixed the Progress.md request URI ,Maintenance > IPCMaintenance > IPCReboot:Fixed Get and Range request URI 11.Maintenance > SystemUpgrade:Deleting files ComponentVersionChck.md, Maintenance > SystemUpgrade > VersionCheck.md content using Maintenance > FtpUpgrade > Check.md content, to the right content 12.Maintenance > DeveloperMode > Range > Table 1:Modified Range table "download_type"field 13.Maintenance > DeviceShutdown > Set:Modified Set request URI 15. Maintenance,Record,Storage,System:Make sure the form jumps correctly, fix translation problems and other detail errors | He xiurong | 2023-10-30 |
1.048 | AI > Recongnition > Database license plate information query > GetCount > Table 3: Delete MsgId field | Tan Tiantian | 2023-10-21 |
1.047 | Login > PreviewChannel > PTZ > Get > Table 2: Delete cruise_state field | Jiang Zhuoyun | 2023-10-20 |
1.046 | 1.Login > Login > DeviceInfo > Get > Table 1: Add the support_camera_day_night_param field to Table 1 of login Deviceinfo | Jiang Zhuoyun | 2023-10-13 |
1.045 | 1. Function > ANR > GetANRTimeInfo chapter omissions Table 1 2. ExtendedFunctionality > AI Mutex Relation > Get: Table 5, Table 4 Add field "mutex_type_between_channel" 3. API > Channel new chapters addedChannel > Scheduled Tasks 4. Push > Push > Query > Table 3: Add "notification_interval_max" "notification_interval_min" "notification_interval" "notification_interval_switch" field 5. API > Push new chapters added Push > PushSubscribe | Jiang Zhuoyun | 2023-10-10 |
1.0.44 | 1. AI > Attribute_Detection : Range > Table 3 , Set > Table 3 and Get > Table 4: Add “ftp_picture_upload”, “picture_to_cloud”, “ftp_video_upload”, “video_to_cloud”, “light_linkage”, “enforcerlight_linkage”, “siren_linkage”, “http_listen_schedule” field | Tan Tiantian | 2023-10-09 |
1.043 | 1. Record > Playback Page > Range > Table 7: Add intrusion, regionEntrance, regionExiting field 2. Login > Login > DeviceInfo > Get > Table 2: Add a new push image type,support_record_type_ex field 3. Login > DevicePage > Get > Table 2: Add Intrusion ->Region Exiting menu page 4. API > Event > Event_check&Event_push > Get&Push > table 7 : Add "Intrusion""RegionEntrance""RegionExiting" field 5. API > Event > Event_check&Event_push > Get&Push > table 10 : Add intrusion, region_entrance, region_exiting field 6. AI > Setup > Line Crossing Detection > Get > Table 4 : Add sensitivity_ex, target_validity, min_pixel, max_pixel field 7. AI > Setup > AI_Func_Schedule > Range > Table 4 : Add intrusion, region_entrance, region_exiting field 8. New features AI > Setup > Intrusion, AI > Setup > Region_Entrance, AI > Setup > Region_Exiting 9. New features ExtendedFunctionality > AI Mutex Relation, ExtendedFunctionality > Mutex Relation | Li Wenlong | 2023-06-01 |
1.042 | 1. Alarm > VoiceAlarm > Get > Table 3 : Add siren_mode field | Li Wenlong | 2023-05-26 |
1.041 | 1. Alarm > Motion Alarm > Range : Table 4 Add field schedule_list,Add Table 5 2. Alarm > Flood-light > Range : Table 4 add deterrence_interval_time add deterrence_schedule field,addTable 7 3. Storage > Audio > Range.md > Table 3 : Add audioin_enable , audioout_enable field 4. Record > Record Configuration > Range : Table 4 add schedule_list field,add Table 5 5. AI > Setup > Human & Vehicle Detection > Range : Table 3 add schedule_list , mutual_exclusion field,add Table 9 6. AI > Setup > Line Crossing Detection > Get : Table 4 add schedule_list, mutual_exclusion field,add table9 7. Add API > ConsumerInfo,Dedicated for consumer docking with NVR packages | Li Wenlong | 2023-05-25 |
1.040 | Add API>THERMAL thermal related API | Li Wenlong | 2023-05-24 |